连云港采创实业有限公司
LIANYUNGANG LOADARM INDUSTRY CO., LTD.

Baoding commercial inner floating plate manufacturer
详情

In order to meet the requirements of double sealing of inner floating roof, the frame structure is selected for the inner floating roof, and the double edge structure is set at the edge of floating roof. The buoyancy of pontoon between the two edges shall satisfy the static load of double seal under static condition and the dynamic friction force during operation. The planned buoyancy force of internal floating roof shall not be less than 2 times of its self weight and the friction force between seal and tank wall. Under the supporting and floating conditions, any part on the inner floating plate of Baoding commercial inner floating plate manufacturer shall be able to accept the converging live load of no less than 2.2kn. The structure of buoyancy element adopts the welding structure of rolled plate.

  Buoyancy. The internal floating plate has a great buoyancy, which can better ensure the amount of volatilization of the medium in the storage tank, so as to better reduce the loss.

The parts are modular. Because the internal floating plate has the characteristics of modular parts, the installation, transportation and manufacturing of the internal floating plate are very simple, so as to save the production cycle to a certain extent.

At the construction site, electricians and welders must work with certificates to ensure construction safety. Repair personnel in the reservoir area to lap the wire, and almost become an electric shock incident. The repair party only handled the warehousing procedures, but did not deal with the confined space work permit and the temporary electricity use permit, and went into the tank construction without permission, which seriously violated the HSE treatment rules of the oil depot.

The repair function is good. The buoyancy element and the floating plate framework of Baoding commercial inner floating plate manufacturer are independent. When repairing, the floating plate can be point-to-point without disassembling and assembling the whole floating plate. There are many buoyancy components in the floating plate. When any two non adjacent floats leak out, the whole floating plate will not be seriously affected, and the floating plate can still operate normally.

分享到:
液体装卸臂,撬装鹤管,低温鹤管,定量装车-连云港采创实业有限公司
联系电话:
联系邮箱:
联系地址:
18061381081
sales@loadarm.cn
江苏省连云港市海州区金桥路23号